Lee Filters Cleaning Aids
Lee Cleaning FluidAnti static cleaning fluid to use on resin or glass filters.
60ml bottle |
|
Tips for cleaning your filters
It is really important to keep filters clean, image quality depends on it. Rain and salt spray are the main offenders here so make sure you give them a good clean after these sessions.
First thing to check when cleaning these filters is to make sure there is no sand or grit on the filters, blow them off with a blower brush. Then using two cloths lay one on a firm flat surface, add one drop ONLY to the filter and wipe in circular motion over the surface of the filter, once it has had a good old rub, take a clean dry part of the cloth and buff off all the cleaning fluid residue. This is the key part to clean filters, if you just keep rubbing with a damp part of the cloth they won't clean properly. Repeat on other side and you are done.
Happy cleaning
First thing to check when cleaning these filters is to make sure there is no sand or grit on the filters, blow them off with a blower brush. Then using two cloths lay one on a firm flat surface, add one drop ONLY to the filter and wipe in circular motion over the surface of the filter, once it has had a good old rub, take a clean dry part of the cloth and buff off all the cleaning fluid residue. This is the key part to clean filters, if you just keep rubbing with a damp part of the cloth they won't clean properly. Repeat on other side and you are done.
Happy cleaning